Leveling Kit Suspension for 2022-2024 Toyota Tundra 2.5-2.5'' Lift Front

TU2225MS Skyjacker Leveling Kit Suspension
For [2.5] '' Lift
[Front]
Leveling Kit Suspension; 2-1/2 Inch Lift; Metal Spacer; With Metal Spacers/ Hardware
Attributes Amount Raised Or Lowered: 2-1/2 Inch Type: Metal Spacer Maximum Tire Size: 34x11.50 Includes Shock/Struts: No Minimum Wheel Diameter: 20 Wheel Backspacing (IN): 18 Wheel Offset (MM): 5.7 Color: Black Material: Steel Estimated Install Time (Hours): 2 The Toyota Tundra sits lower in the front than the rear. This factory rake, nose-down stance is very evident. Skyjacker's 2.5 Inch Front Metal Spacer will raise the front of your Tundra to give a more level stance. Raising your front ride height will add suspension clearance to add those bigger, more aggressive 295/60R20 off-road tires. Those bigger tires will add ground clearance. Added ground clearance will prevent you from scrubbing on turns and from bottoming out on the bumps, rocks, off-road debris or even a steep driveway. Increase equipment capabilities and compensate for added weight of accessories like a winch, off-road bumper or combination of both. Retain your Tundra factory tuned performance struts by utilizing top mounted strut spacers to elevate the stance. (Front OEM strut stays assembled, so there is no need for a strut spring compressor.) Skyjacker's 1-piece top mount strut spacer has a strong tab-and-slot interlocked design specifically engineered with camber offsets. These top mount strut spacers integrate smoothly with OEM suspension geometry and function perfectly allowing the CV axles to operate within limits of OEM upper and lower control arms. Features & Benefits Front Metal Spacer Will Raise The Front Of Your Tundra To Give A More Level Stance Will Add Suspension Clearance To Add Those Bigger, More Aggressive 295/60R20 Off-Road Tires Added Ground Clearance Will Prevent You From Scrubbing On Turns And From Bottoming Out On The Bumps, Rocks, Off-Road Debris Or Even A Steep Driveway Increase Equipment Capabilities And Compensate For Added Weight Of Accessories Like A Winch, Off-Road Bumper Or Combination Of Both 1-Piece Top Mount Strut Spacer Has A Strong Tab-And-Slot Interlocked Design Specifically Engineered With Camber Offsets Top Mount Strut Spacers Integrate Smoothly With OEM Suspension Geometry And Function Perfectly Allowing The CV Axles To Operate Within Limits Of OEM Upper And Lower Control Arms Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/SKY/InstallationInstructions/I-TU2225MS.pdf
[Amount Raised Or Lowered: 2-1/2 Inch Type: Metal Spacer Maximum Tire Size: 34x11.50 Includes Shock/Struts: No Minimum Wheel Diameter: 20 Wheel Backspacing (IN): 18 Wheel Offset (MM): 5.7 Color: Black Material: Steel Estimated Install Time (Hours): 2 ]