K4148DL Fabtech Lift Kit Suspension For [5.0] '' Lift [Full Front and Rear, Front, Rear] Lift Kit Suspension; Dirt Logic 2.5 ™; 5 Inch Front Lift; 5 Inch Rear Lift; With Front Coil Over Remote Reservior Shock Absorber And Rear Dirt Logic Shock Absorbers; Black Components/ Silver Shock Absorbers; With Rear Coil Springs/ Front And Rear Lower Control Arms/ Bump Stop Extensions/ Front Crossmemeber/ Track Bar Brackets/ Flipped Drag Links/ Front And Rear Stabilizer Bar Links/ Installation Hardware; Requires Drive Shaft (See Required Parts)
Attributes Front Lift Amount (IN): 5 Inch Rear Lift Amount (IN): 5 Inch Front Lift Type: Coil Over Shock Absorber Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -13 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers
Fabtech's 5 Inch Crawler ® Coilover system provides unsurpassed articulation for offroad use with great highway manners for the daily driver. This Jeep JL Long Arm system is built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. This Jeep JL Coilover Conversion provides superior offroad suspension damping with a great highway ride compared to a separate coil spring and shock configuration. The stainless steel Dirt Logic 2.5 Coilover offers a noticeable increase in ride quality and high speed damping that Jeep owners will appreciate. A key part of the mounting of the Crawler's 5 Ton Link Arms ® to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arms are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 Inch OD 0.313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton joints ® that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Features & Benefits Corner Specific Dual Rate Coils Springs Provide A Level Stance Side To Side And Offer Factory Load Carrying Capacity With A Smooth Ride Heavy-Duty Draglink Is Relocated On The Steering Knuckle To Retain The Factory Steering Geometry With The Stock Pitman Arm Front And Rear Bump Stop Extensions Keep The Suspension From Over Cycling With The Increased Ride Height Preventing Damage To Steering And Suspension Parts Weld On 1/4 Inch Thick Steel Bracket Is Built To Eliminate Mount Deflection When The Track Bar Moves Through Its Full Cycle Bolt-On Front Dirt Logic 2.5 Coilover Conversion Provides Outstanding High Speed Damping With The Ability To Crawl At Low Speed With Maximum Articulation For Big Rocks Dirt Logic Shocks Have A Superior Ride Quality Both On And Offroad With Excellent Damping For Offroad Use Limited Lifetime Warranty
[Front Lift Amount (IN): 5 Inch
Rear Lift Amount (IN): 5 Inch
Front Lift Type: Coil Over Shock Absorber
Rear Lift Type: Coil Spring
Maximum Tire Size: 37 x 12.50
Shock Type: Hydraulic/ Nitrogen Gas Charged
Wheel Backspacing (IN): 4.50
Minimum Wheel Diameter: 17
Wheel Offset (MM): -13
Shocks: With Shocks In Kit
Color: Black Components/ Silver Shock Absorbers
]