Lift Kit Suspension for 2018-2023 Jeep Wrangler JL 5-5'' Lift Front and Rear, Front, Rear

K4145DL Fabtech Lift Kit Suspension
For [5.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Dirt Logic 2.25 ™; 5 Inch Front Lift; 5 Inch Rear Lift; With Front And Rear Dirt Logic Remote Reservior Shock Absorbers; Black Components/ Silver Shock Absorbers; With Front And Rear Coil Springs/ Front And Rear Lower And Upper Control Arms/ Bump Stop Extensions/ Track Bar Brackets/ Flipped Drag Link/ Front And Rear Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 5 Inch Rear Lift Amount (IN): 5 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -13 Shocks: With Front And Rear Dirt Logic Remote Reservoir Shock Absorbers Color: Black Components/ Silver Shock Absorbers Fabtech's JL Crawler long arm systems are built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler's 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 Inch OD 0.313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton joints ® that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street. Features & Benefits Corner Specific Dual Rate Coils Springs Provide A Level Stance Side To Side And Offer Factory Load Carrying Capacity With A Smooth Ride Heavy-Duty Draglink Is Relocated On The Steering Knuckle To Retain The Factory Steering Geometry With The Stock Pitman Arm Front And Rear Bump Stop Extensions Keep The Suspension From Over Cycling With The Increased Ride Height Preventing Damage To Steering And Suspension Parts Factory Brake Lines Are Relocated Down With Simplistic Brackets For The New Range Of Travel To Prevent Tugging And Interfere With Suspension Components Provides Excellent Damping For Offroad Use Limited Lifetime Warranty


[Front Lift Amount (IN): 5 Inch Rear Lift Amount (IN): 5 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -13 Shocks: With Front And Rear Dirt Logic Remote Reservoir Shock Absorbers Color: Black Components/ Silver Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS24210 (F37 FTS24210); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24223 (F37 FTS24223); Quantity Required: 1; Lift Kit Component; Component For K4131M/ K4131DL/ K4132DL/ K4144DL/ K4145DL}
, {Fabtech Motorsports FTS24224 (F37 FTS24224); Quantity Required: 1; Lift Kit Component; Component For K4131M/ K4131DL/ K4132DL/ K4144DL/ K4145DL}
, {Fabtech Motorsports FTS24225 (F37 FTS24225); Quantity Required: 1; Lift Kit Component; Component For K4131M/ K4131DL/ K4132DL/ K4144DL/ K4145DL}
, {Fabtech Motorsports FTS24233 (F37 FTS24233); Quantity Required: 1; Lift Kit Component; Component For K4131M/ K4131DL/ K4132DL/ K4144DL/ K4145DL}
, {Fabtech Motorsports FTS801422 (F37 FTS801422); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; With Remote Reservoir; One Year Warranty; Non Adjustable}
, {Fabtech Motorsports FTS801432 (F37 FTS801432); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; With Remote Reservoir; One Year Warranty; Non Adjustable}