K4131DL Fabtech Lift Kit Suspension For [3.0] '' Lift [Full Front and Rear, Front, Rear] Lift Kit Suspension; Dirt Logic 2.25 ™; 3 Inch Front Lift; 3 Inch Rear Lift; With Front And Rear Dirt Logic Shock Absorbers; Black Components/ Silver Shock Absorbers; With Front And Rear Coil Springs/ Front And Rear Lower Control Arms/ Bump Stop Extensions/ Track Bar Brackets/ Flipped Drag Link/ Front And Rear Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -13 Shocks: With Front And Rear Dirt Logic Shock Absorbers Color: Black Components/ Silver Shock Absorbers
Fabtech's JL Crawler long arm systems are built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler's 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 Inch Outer Diameter 0.313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton joints ® that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Features & Benefits Corner Specific Dual Rate Coils Springs Provide A Level Stance Side To Side And Offer Factory Load Carrying Capacity With A Smooth Ride Provides Bind Free Operation At Full Articulation And Eliminates Bump Steer Throughout The Travel Front And Rear Bump Stop Extensions Keep The Suspension From Over Cycling With The Increased Ride Height Preventing Damage To Steering And Suspension Parts Factory Brake Lines Are Relocated Down With Simplistic Brackets For The New Range Of Travel To Prevent Tugging And Interfere With Suspension Components Constructed Of A Stainless Steel Body With A NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability Limited Lifetime Warranty
[Front Lift Amount (IN): 3 Inch
Rear Lift Amount (IN): 3 Inch
Front Lift Type: Coil Spring
Rear Lift Type: Coil Spring
Maximum Tire Size: 35 x 12.50
Shock Type: Hydraulic/ Nitrogen Gas Charged
Wheel Backspacing (IN): 4.50
Minimum Wheel Diameter: 17
Wheel Offset (MM): -13
Shocks: With Front And Rear Dirt Logic Shock Absorbers
Color: Black Components/ Silver Shock Absorbers
]