Lift Kit Suspension for 2018-2023 Jeep Wrangler JL 3-3'' Lift Front and Rear, Front, Rear

K4117DL Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Dirt Logic 2.25 ™; 3 Inch Front Lift; 3 Inch Rear Lift; With Front And Rear Dirt Logic Shock Absorbers; Black Components; With Front And Rear Coil Springs/ Front And Rear Lower Control Arms/ Bump Stop Extensions/ Track Bar Brackets/ Flipped Drag Link/ Front And Rear Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components This Trail system provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. On road, the suspension has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory control arm mounts for an easy installation. The Fabtech heavy-duty link arms are constructed of 1-3/4 Inch Outer Diameter. 1/4 Inch thick wall steel tubing that are guaranteed never to bend. They come with large poly urethane bushings on one end with internal threads on the other to accept the ground breaking Fabtech 5 Ton Joint ® for longevity and a quiet ride. Fabtech's long travel Dual Rate coil Springs are corner specific to the JL. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip System along with a heavy-duty Track Bar bracket is included. This relocates the steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The factory angle of the draglink to the pitman arm does not change and there is no increased side load on the steering box sector shaft as compared to using a dropped pitman arm. This helps extends the life of the steering box with the increased ride height. Features & Benefits Front And Rear Bumps Stop Extensions Protect The Suspension From Over Cycling Heavy-Duty Rear Track Bar Bracket With Side Support Maintains The Factory Roll Center Of The Vehicle While Centering The Axle Made In USA Fast And Trouble-Free Installation Limited Lifetime Warranty


[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS24205 (F37 FTS24205); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24208 (F37 FTS24208); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24209 (F37 FTS24209); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24210 (F37 FTS24210); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS811402 (F37 FTS811402); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non}
, {Fabtech Motorsports FTS811412 (F37 FTS811412); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non}