K4117M Fabtech Lift Kit Suspension For [3.0] '' Lift [Full Front and Rear, Front, Rear] Lift Kit Suspension; Stealth; 3 Inch Front Lift; 3 Inch Rear Lift; With Front And Rear Stealth Shock Absorbers; Black Components; With Front And Rear Coil Springs/ Front And Rear Lower Control Arms/ Bump Stop Extensions/ Track Bar Brackets/ Flipped Drag Link/ Front And Rear Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components
This Trail system provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. On road, the suspension has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory control arm mounts for an easy installation. The Fabtech heavy-duty link arms are constructed of 1-3/4 Inch Outer Diameter. 1/4 Inch thick wall steel tubing that are guaranteed never to bend. They come with large poly urethane bushings on one end with internal threads on the other to accept the ground breaking Fabtech 5 Ton Joint ® for longevity and a quiet ride. Fabtech's long travel Dual Rate coil Springs are corner specific to the JL. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip System along with a heavy-duty Track Bar bracket is included. This relocates the steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The factory angle of the draglink to the pitman arm does not change and there is no increased side load on the steering box sector shaft as compared to using a dropped pitman arm. This helps extends the life of the steering box with the increased ride height.
Features & Benefits Proper Factory Bushing Cross Bolt Angles Are Parallel On Fabtech Short Arm Link Arms Eliminating Premature Bushing Wear Resulting In Poor Handling Corner Specific Dual Rate Coils Springs Provide A Level Stance Side To Side And Offer Factory Load Carrying Capacity With A Smooth Ride Provides Bind Free Operation At Full Articulation And Eliminates Bump Steer Throughout The Travel Bolt On 1/4 Inch Thick Steel Bracket Is Built To Eliminate Mount Deflection When The Track Bar Moves Through Its Full Cycle Front And Rear Bump Stop Extensions Keep The Suspension From Over Cycling With The Increased Ride Height Preventing Damage To Steering And Suspension Parts Extended Length Monotube Shocks Have A Nitro Carborized Piston Rod For Corrosion Resistance And Resist Rock Chipping Limited Lifetime Warranty
[Front Lift Amount (IN): 3 Inch
Rear Lift Amount (IN): 3 Inch
Front Lift Type: Coil Spring
Rear Lift Type: Coil Spring
Maximum Tire Size: 37 x 12.50
Shock Type: Nitrogen Gas Charged
Wheel Backspacing (IN): 4.50
Minimum Wheel Diameter: 17
Wheel Offset (MM): -12.7
Shocks: With Shocks In Kit
Color: Black Components
]