Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 1-1'' Lift Front and Rear, Front, Rear

G250PELT Skyjacker Lift Kit Suspension
For [2.5, 1.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 2-1/2 Inch Front Lift; 1 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front Dual Rate Coil Springs/ Rear Coil Spring Spacers/ Front Shock Extensions/ Bump Stop Extensions/ Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 2-1/2 Inch Rear Lift Amount (IN): 1 Inch Front Lift Type: Coil Springs Rear Lift Type: Coil Springs Maximum Tire Size: 35 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.5 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Your Jeep Gladiator JT was engineered as a rugged utility vehicle that yearns for exploration and adventure. Enjoy wide-open freedom by going bigger in a better way with this cost-effective coil spring front / spacer rear option. Get better approach angles, middle break-over angles and rear departure angles with more aggressive 35s. The key to gaining lift height and keeping your stock-like ride is Skyjacker’s coil springs. Skyjacker specifically engineered a progressive variable rate coil spring, distinctively a 2-stage dual rate long travel coil. Spring rate progression is from a 1st Flex Rate to a 2nd Ride Rate. The 1st Flex Rate stage of the coil spring delivers a comfortable ride with the ability to flex for increased articulation. The coil spring flex rate expands during full articulation as the suspension drops (full droop). This keeps the coils spring seated in the upper coil mount/bucket and the tires in contact with the terrain. Features & Benefits The 2nd Ride Rate Stage Only Engages After Compression Past The Flex Rate 2nd Ride Rate Gives Optimal Performance And Consistent Controlled Stability During Body Roll And Aggressive Off-Road Suspension Movement The Strong Tab And Slot Interlocked Integrity Of The Rear 1-Piece Coil Spring Spacers Raises The Rear 1 Inch To Gain A More Level Stance Front 2 Inch Bump Stop Spacers Bolt Onto The Axle Bump Pad To Properly Limit The Compression Stroke Well-Built Front Shock Extension Relocation Brackets Reposition Your Factory Shocks Extended Length Sway Bar End Links Allow Full Articulation As The Suspension Drops The Front End Links Comes With Skyjacker Installed Pressed-In HD OEM Style Rubber Bushings Zinc Plated For Corrosion Protection The Rear End Links Come With Press-In Poly Bushings Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/SKY/InstallationInstructions/I-G251.pdf
[Front Lift Amount (IN): 2-1/2 Inch Rear Lift Amount (IN): 1 Inch Front Lift Type: Coil Springs Rear Lift Type: Coil Springs Maximum Tire Size: 35 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.5 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black ]