Lift Kit Suspension for 2021-2023 Jeep Gladiator JT 3-3'' Lift Front and Rear, Front, Rear

K4189 Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front Coil Springs/ Rear Coil Spring Spacers/ Shock Absorber Brackets/ Stabilizer Bar Links/ Bump Stop Spacers/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers This Sport lift kit is Fabtech's most popular Jeep system providing increased ride height and suspension performance at a great price. Installation is easy and can be installed in a couple hours. The rear of the vehicle receives coil spring spacers retaining the factory ride and load carrying capacity. The spacer height is 1-3/4 Inch to help level the stance of the vehicle. Four bump stops extensions utilize the factory bump stops for compliant cushioning at full compression. The extensions retain the stock down travel to eliminate over cycling of the suspension and driveline. The extended length front and rear sway bar links with urethane bushings reposition the bars to work within the factory operating planes. By extending the length of the links, it prevents the sway bar from going over center and creating bind at full extension travel. The factory shocks are retained with steel extension brackets keeping the shocks in the proper travel range with the new ride height. Features & Benefits Features Front Coil Springs That Are A Dual Rate Design Allowing Extended Suspension Travel For Offroad Use While Providing A Smooth Highway Ride First Stage Of The Spring Provides A Soft Ride With The Ability To Extend For Additional Travel Second Stage Is Designed To Handle The Payload Of The Vehicle And Address Large Impact Absorption At Higher Speeds By Extending The Length Of The Links, It Prevents The Sway Bar From Going Over Center And Creating Bind At Full Extension Travel Gladiator Lift Kit Is An Excellent Choice For The Jeep Enthusiast That Wants To Run Larger Tires With Enhanced Offroad Capability And A Good Highway Ride Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT24241i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT24242i.pdf
[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS24241 (F37 FTS24241); Quantity Required: 1; Lift Kit Component; Component For K4156}
, {Fabtech Motorsports FTS24294 (F37 FTS24294); Quantity Required: 1; Lift Kit Component; Component for K4189/ K4190/ K4191}