• Out-of-Stock
Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 2-2'' Lift Front and Rear, Front, Rear
search
  • Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 2-2'' Lift Front and Rear, Front, Rear
  • Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 2-2'' Lift Front and Rear, Front, Rear

Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 2-2'' Lift Front and Rear, Front, Rear

https://www.amazon.com/s?k=Fabtech+K4185 Find on Amazon.com
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

K4185 Fabtech Lift Kit Suspension
For [2.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Trail; 2 Inch Front Lift; 2 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front And Rear Coil Springs/ Shock Absorber Brackets/ Stabilizer Bar Links/ Drag Link Flip Kit/ Front And Rear Track Bar Brackets/ Bump Stop Spacers/ Lower Control Arms/ Installation Hardware
Attributes Front Lift Amount (IN): 2 Inch Rear Lift Amount (IN): 2 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 20 Wheel Offset (MM): -12.7 Shocks: Without Shocks In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers This Gladiator Mojave lift kit provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. The Mojave lift kit has been tuned with proper dual rate coil springs to work in conjunction with the Fox 2.5 Internal bypass shocks for a superior ride quality. The system is a complete short arm suspension that utilizes the factory lower control arm mounts for an easy installation. The Fabtech lower link arms are constructed of thick wall steel tubing that are guaranteed never to bend. They come with large polyurethane bushings on one end with internal threads on the other to accept the groundbreaking Fabtech 5 Ton Joint ® for longevity and a quiet ride. Fabtech's dual rate coil springs are corner specific to the Gladiator. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. The heart of the factory Jeep Mojave suspension is the Fox 2.5 Internal Bypass shocks. This Fabtech lift kit retains those shocks with heavy-duty extension brackets that are designed for rugged offroad use. The Fox hydraulic bump stops are also retained and the bump stop pads are relocated to work in conjunction with the new ride height for proper suspension travel operation. To address the steering geometry with the increased ride height, a Draglink Flip kit along with a heavy-duty Track Bar bracket is included. This relocates the Gladiator Mojave steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. Features & Benefits Dual Rate Coil Spring Keeps The Vehicle Level Side To Side And Allows For Increased Suspension Travel Heavy-Duty Extension Steel Brackets That Are Designed For Rugged Offroad Use Urethane Bushings To Reposition The Sway Bar Links To Work Within The Factory Operating Planes Hydraulic Bump Stops To Keep The Suspension From Over Cycling With The Increased Ride Height Limited Lifetime Warranty


[Front Lift Amount (IN): 2 Inch Rear Lift Amount (IN): 2 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 20 Wheel Offset (MM): -12.7 Shocks: Without Shocks In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS24210 (F37 FTS24210); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24245 (F37 FTS24245); Quantity Required: 1; Lift Kit Component; Component For K4167}
, {Fabtech Motorsports FTS24246 (F37 FTS24246); Quantity Required: 1; Lift Kit Component; Component For K4175M/ K4175DL/ K4176DL}
, {Fabtech Motorsports FTS24283 (F37 FTS24283); Quantity Required: 1; Lift Kit Component; Component For K4184/ K4185}
, {Fabtech Motorsports FTS24286 (F37 FTS24286); Quantity Required: 1; Lift Kit Component; Component For K4185}
K4185
Fabtech
K4185

Data sheet

Item type
Lift Kit Suspension
Brand
Fabtech
Make 2020-2023 Jeep Gladiator JT
Jeep
Model 2020-2023 Jeep Gladiator JT
Gladiator JT
Year 2020-2023 Jeep Gladiator JT
2020
2021
2022
2023
Position
Front
Full Front and Rear
Rear
Item Lift
2.0
Comments (0)
No customer reviews for the moment.