• Out-of-Stock
Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 5-5'' Lift Front and Rear, Front, Rear
search
  • Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 5-5'' Lift Front and Rear, Front, Rear
  • Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 5-5'' Lift Front and Rear, Front, Rear

Lift Kit Suspension for 2020-2023 Jeep Gladiator JT 5-5'' Lift Front and Rear, Front, Rear

https://www.amazon.com/s?k=Fabtech+K4177DL Find on Amazon.com
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

K4177DL Fabtech Lift Kit Suspension
For [5.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Dirt Logic; 5 Inch Front Lift; 5 Inch Rear Lift; With Front And Rear Dirt Logic Shock Absorbers In Kit; Black Components; With Front And Rear Coil Springs/ Front And Rear Lower Control Arms/ Stabilizer Bar Links/ Bump Stop Spacers/ Drag Link Flip/ Front And Rear Track Bar Brackets/ Installation Hardware
Attributes Front Lift Amount (IN): 5 Inch Rear Lift Amount (IN): 5 Inch Front Lift Type: Coil Springs And Lower Control Arms Rear Lift Type: Coil Springs And Lower Control Arms Maximum Tire Size: 37 x 12.50 Stock Fenders/ 40 x 12.50 High Clearance Fenders Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components A key part of the Crawler kit is the Link Arm geometry and ground clearance. The location of the of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the Gladiator's sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arms are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the Gladiator frame for hard offroad use. Adjustable rear links utilize the factory frame and axle brackets for an easy installation. The Fabtech lower Link Arms are massive and built of 2 Inch Outer Diameter 0.313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech's legendary 5 Ton Joints ® that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street. Features & Benefits Corner Specific Dual Rate Coils Springs Provide A Level Stance Side To Side And Offer Factory Load Carrying Capacity With A Smooth Ride Proper Factory Bushing Cross Bolt Angles Are Parallel On Fabtech Short Arm Link Arms Eliminating Premature Bushing Wear Resulting In Poor Handling Providing Increased Suspension Travel For Offroad Use Front Lower Shock Mount Reposition The Front Shocks, So They Function Without Interference Of Suspension Components Or The Axle With The Increased Articulation Dirt Logic Shocks Constructed Of A Stainless Steel Body With A NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability Extended Length Front And Rear Sway Bar Links With Urethane Bushings Reposition The Bars To Work Within The Factory Operating Planes Front And Rear Bump Stop Extensions Keep The Suspension From Over Cycling With The Increased Ride Height Preventing Damage To Steering And Suspension Parts Limited Lifetime Warranty


[Front Lift Amount (IN): 5 Inch Rear Lift Amount (IN): 5 Inch Front Lift Type: Coil Springs And Lower Control Arms Rear Lift Type: Coil Springs And Lower Control Arms Maximum Tire Size: 37 x 12.50 Stock Fenders/ 40 x 12.50 High Clearance Fenders Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS24210 (F37 FTS24210); Quantity Required: 1; Lift Kit Component; Component For K4117M/ K4117DL/ K4118DL}
, {Fabtech Motorsports FTS24224 (F37 FTS24224); Quantity Required: 1; Lift Kit Component; Component For K4131M/ K4131DL/ K4132DL/ K4144DL/ K4145DL}
, {Fabtech Motorsports FTS24252 (F37 FTS24252); Quantity Required: 1; Lift Kit Component; Component For K4177}
, {Fabtech Motorsports FTS24254 (F37 FTS24254); Quantity Required: 1; Lift Kit Component; Component For K4175M/ K4175DL/ K4176DL}
, {Fabtech Motorsports FTS24258 (F37 FTS24258); Quantity Required: 1; Lift Kit Component; Component For K4177}
, {Fabtech Motorsports FTS811402 (F37 FTS811402); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non}
, {Fabtech Motorsports FTS811502 (F37 FTS811502); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non}
K4177DL
Fabtech
K4177DL

Data sheet

Item type
Lift Kit Suspension
Brand
Fabtech
Make 2020-2023 Jeep Gladiator JT
Jeep
Model 2020-2023 Jeep Gladiator JT
Gladiator JT
Year 2020-2023 Jeep Gladiator JT
2020
2021
2022
2023
Position
Front
Full Front and Rear
Rear
Item Lift
5.0
Comments (0)
No customer reviews for the moment.