K1128 Fabtech Lift Kit Suspension For [3.0, 1.5] '' Lift [Full Front and Rear, Rear] Lift Kit Suspension; Budget System; 3 Inch Front Lift; 1-1/2 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Coil Spacers/ Upper Control Arms/ Ball Joints/ Rear Lift Blocks/ U-Bolts/ Shock Extensions/ Installation Hardware
Attributes Front Lift Amount (IN): 3-1/2 Inch Rear Lift Amount (IN): 3-1/2 Inch Front Lift Type: Coil Spring Spacer Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 33 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: Without Shocks In Kit - Shock Change Not Necessary Color: Black Components/ White Shock Absorbers
Fabtech's Upper Control Arm system provides a 3-1/2 Inch increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with steel spacers that utilizes the factory Adaptive Ride Control coilovers. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy-Duty ball joints allow for extended travel to eliminate binding. Rear lift comes from 1-1/2 Inch blocks and U-bolts. Heavy-Duty rear shock extension brackets retain the factory Adaptive Ride Control shocks for an outstanding ride quality.
Features & Benefits Value Priced System With Fabtech Quality Increased Ground Clearance Extended Range Upper Ball Joints Provide A Smooth Quiet Ride Increased Fender Clearance Compared To A Leveling Kit For 33 Inch Tall Tires Suspension Can Be Restored To Stock Easy To Install Limited Lifetime Warranty
https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/K1128_INS.pdf
[Front Lift Amount (IN): 3-1/2 Inch
Rear Lift Amount (IN): 3-1/2 Inch
Front Lift Type: Coil Spring Spacer
Rear Lift Type: Blocks And U-Bolts
Maximum Tire Size: 33 x 12.50
Shock Type: Without Shocks
Wheel Backspacing (IN): 5.00
Minimum Wheel Diameter: 18
Wheel Offset (MM): 0
Shocks: Without Shocks In Kit - Shock Change Not Necessary
Color: Black Components/ White Shock Absorbers
]
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
Lift Kit Suspension Budget System 3 Inch Front Lift 1-1/2 Inch Rear Lift Without Shock Absorbers In Kit - Shock Change Not Necessary Black Components With Coil Spacers/ Upper Control Arms/ Ball Joints/ Rear Lift Blocks/ U-Bolts/ Shock Extensions/ Installation Hardware