Shock Absorber for 1988-1997 Ford F-53 Motorhome Chassis

24-187022 Bilstein Shock Absorber


Extended length, in. :Nitrogen Gas Charged With Coil Spring
Collapsed length, in. :Nitrogen Gas Charged With Coil Spring
Upper mount: Nitrogen Gas Charged With Coil Spring
Lower Mount: Nitrogen Gas Charged With Coil Spring
Shock Absorber; B6 © Series; Nitrogen Gas Charged; Limited Lifetime Warranty; Not Adjustable; Without Shock Boots; Single
Attributes Type: Nitrogen Gas Charged With Coil Spring: No Internal Design: Monotube Adjustable Valving: No Extended Length (IN): 27.44 Inch Compressed Length (IN): 16.8 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet Body Color: Yellow Quantity: Single Universality: Vehicle Specific Rod Diameter (IN): 1.81 Inch Valving Type: Self-Adjusting Deflective Disc Valving Rod Material: Steel Body Material: Steel With Reservoir: No Includes Dust Shield: No Includes Hardware: No Includes Boot: Yes Estimated Install Time (Hours): 0.5 Bilstein B6 Comfort gas pressure shocks and struts are for the driver who wants maximum ride comfort, with the virtual elimination of "bottoming out" and vehicle sway. These shocks generally maintain and, in many cases, enhance a vehicle's original ride qualities while increasing road-handling and overall stability. Features & Benefits Increased Power Reserves And Service Life, Even When Pulling Transporters And Trailers Or During Frequent Journeys With Loads Optimum Addition And Enhanced Lane Change Stability In Both Day To Day And Extreme Solutions Marked Improvement In Safety And Performance Without Additional Spring Changes Bilstein Gas Pressure Technology Bilstein Monotube/Upside Down Technology Road And Track Tested By Bilstein For Fine Tuning Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/BLS/InstallationInstructions/Generic_instructions_02.pdf https://vehiclepartimages.com/PMDT/BLS/Warranty/warranty_all_v2.1.pdf https://vehiclepartimages.com/PMDT/BLS/TechnicalBulletins/Generic_instructions_02.pdf https://vehiclepartimages.com/PMDT/BLS/InstallationInstructions/USA SDS_Shock_Air Spring_V2_EN.pdf https://vehiclepartimages.com/PMDT/BLS/TechnicalBulletins/USA SDS_Shock_Air Spring_V2_EN.pdf
[Type: Nitrogen Gas Charged With Coil Spring: No Internal Design: Monotube Adjustable Valving: No Extended Length (IN): 27.44 Inch Compressed Length (IN): 16.8 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet Body Color: Yellow Quantity: Single Universality: Vehicle Specific Rod Diameter (IN): 1.81 Inch Valving Type: Self-Adjusting Deflective Disc Valving Rod Material: Steel Body Material: Steel With Reservoir: No Includes Dust Shield: No Includes Hardware: No Includes Boot: Yes Estimated Install Time (Hours): 0.5 ]