Leveling Kit Suspension for 2008-2016 Ford F-250 Super Duty 4WD 2.5-2.5'' Lift Front, Rear

K2376 Fabtech Leveling Kit Suspension
For [2.5] '' Lift
[Front, Rear]
Leveling Kit Suspension; 2-1/2 Inch Lift; Coil Springs; With Coil Springs/ Track Bar/ Front And Rear Performance Shock Absorbers/ Installation Hardware
Attributes Amount Raised Or Lowered: 2-1/2 Inch Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4 Wheel Offset (MM): -25.4 Color: White Material: Stainless Steel Estimated Install Time (Hours): 2 This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2-1/2 Inch lift kit, you can run 35 Inch tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 Degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Performance shocks. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. Features & Benefits Fabtech's Coil Springs Retain The Factory Load Carrying Capacity Fabtech Track Bar Allows For On The Vehicle Adjustment To Center The Axle Under The Vehicle Features Sway Bar Drop Brackets To Reposition The Front Bar Suspension Kit Utilizes The Factory Bump Stops Without Extensions Easy To Install Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT92031i.pdf
[Amount Raised Or Lowered: 2-1/2 Inch Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4 Wheel Offset (MM): -25.4 Color: White Material: Stainless Steel Estimated Install Time (Hours): 2 ]

Kit components:
{Fabtech Motorsports FTS22328 (F37 FTS22328); Quantity Required: 1; Lift Kit Component; Component For K2376}
, {Fabtech Motorsports FTS7191 (F37 FTS7191); Quantity Required: 2; Shock Absorber; Performance Twin Tube; Hydraulic; One Year Warranty; Not Adjustable; Without Shock Boots; Single}
, {Fabtech Motorsports FTS7266 (F37 FTS7266); Quantity Required: 2; Shock Absorber; Performance Twin Tube; Hydraulic; One Year Warranty; Not Adjustable; Without Shock Boots; Single}
, {Fabtech Motorsports FTS92030 (F37 FTS92030); Quantity Required: 1; Track Bar; 0-4 Inch Lift; Adjustable; Black}