Lift Kit Suspension for 2021-2023 Ford Bronco 3-3'' Lift Front and Rear, Front, Rear

K2383 Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front Upper Ball Joint Control Arms/ Front And Rear Strut Assembly Spacers/ Rear Track Bar Bracket/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Spacers Rear Lift Type: Strut Assembly Spacer Maximum Tire Size: 35 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shocks In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers Fabtech's High quality 3 Inch Bronco lift kit offers increased height to run 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Bronco upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without binding. These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front and rear Coilover shocks are retained and receive spacers that provide height while maintaining the comfortable stock highway ride quality. With the increased ride height, the rear axle becomes offset to the vehicle. Fabtech addresses this with a heavy-duty track bar relocation bracket that re-centers the axle under the vehicle. This provides proper tracking of the axle to the vehicle as Ford intended it. This Bronco lift kit is an affordable suspension upgrade for enthusiasts that desire to run 35 Inch tall tires with Fabtech quality and strength. Features & Benefits Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball Retains Stock Coilover Shocks For A Factory Ride Heavy-Duty Track Bar Bracket Re-Centers Axle Under The Vehicle For Proper Tracking Great System For The Daily Driver That Requires Increased Offroad Performance Limited Lifetime Warranty


[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Spacers Rear Lift Type: Strut Assembly Spacer Maximum Tire Size: 35 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shocks In Kit - Shock Change Not Necessary Color: Black Components/ Black Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS22336 (F37 FTS22336); Quantity Required: 1; Lift Kit Component; Component For K2378}
, {Fabtech Motorsports FTS22342 (F37 FTS22342); Quantity Required: 1; Lift Kit Component; Component For K2383}