Lift Kit Suspension for 2023-2023 Chevrolet Silverado 1500 3-3'' Lift Front and Rear

K1197DL Fabtech Lift Kit Suspension
For [4.0, 3.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; Dirt Logic; 4 Inch Front Lift; 3 Inch Rear Lift; With Front Dirt Logic Coil Over Shock Absorbers and Rear Dirt Logic Shock Absorbers In Kit; Black Component; With Front Steering Knuckles/ Crossmembers/ Rear Lift Blocks And U Bolts/ Skid Plate/ Differential Mounts/ Tie Rods/ Rear Bump Stop Spacers/ Installation Hardware
Attributes Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Steering Knuckles Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 35 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): -6.35 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers Fabtech's suspension system for these two trucks provide a 4 Inch lift height on top of the factory 2 Inch lift for clearance of 35 Inch tall tires. Once a Trail Boss or AT4 is lifted with a Fabtech 4 Inch system, the truck will sit at the same height as a 1500 with a 6 Inch suspension and 35 Inch tires. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Features & Benefits Crossmembers Are Arched For Maximum Ground Clearance And Provides Additional Strength To The Front Suspension Steering Knuckles Provide Zero Bump Steer Throughout The Suspension Travel Oversized Tie Rods Are Provided To Replace The Stock Units That Are Designed To Handle Oversized Tires Dirt Logic Shocks Constructed Of A Stainless Steel Body With A NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability Heavy-Duty Front Differential Skid Plate Protects The Differential From Offroad Obstacles Triple Differential Mounts Properly Reposition The Front Differential For The Precise CV And Driveshaft Angle To Reduce Driveline Vibration At High Speed Billet Spacers Relocate The Factory Closed Cell Bump Stops To Control The Travel Eliminating Over Cycling Of The Suspension Rear Lift Blocks Replace The Factory Blocks For Additional Lift Without Changing The Ride Quality Or Load Carrying Capacity U-Bolts Designed To Attach The Entire Rear Differential To The Vehicle Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT21250i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT81056i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT82577i.pdf
[Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Steering Knuckles Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 35 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): -6.35 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS21250 (F37 FTS21250); Quantity Required: 1; Lift Kit Component; Component For Lift Kit K1132/ K1132M/ K1133DL/ K1134DL}
, {Fabtech Motorsports FTS21251 (F37 FTS21251); Quantity Required: 1; Lift Kit Component; Component For Lift Kit K1132/ K1132M/ K1133DL/ K1134DL}
, {Fabtech Motorsports FTS21300 (F37 FTS21300); Quantity Required: 1; Lift Kit Component; Component For K1193DL}
, {Fabtech Motorsports FTS811462 (F37 FTS811462); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non}